AB Electronics

The Raspberry Pi is a great low cost computer with thousands of different uses but one thing it does not come with is a real-time clock. This mean...

RS232 Master Port. Control the Raspberry Pi Zero over RS232 or connect to external serial accessories. Stackable with other Raspberry Pi accessory...

Features 8 x 17-bit 0 to 5V Single Ended Inputs Control via the Raspberry Pi I2C port Stack up to 4 ADC Pi boards on a single Raspberry Pi Jumper s...

The Breakout Pi Zero is a useful and versatile prototyping expansion board for the Raspberry Pi Zero computer. All of the Raspberry Pi GPIO pins ex...

RS232 Master Port. Control the Raspberry Pi over RS232 or connect to external serial accessories. Stackable with other Raspberry Pi accessory boar...

The ADCDAC Pi Zero is compatible with all Raspberry Pi models from the A+ and B+ onwards. The ADC-DAC Pi Zero is a 2 channel 12 bit analogue to dig...

The Breakout Pi Plus is a useful and versatile prototyping expansion board for the Raspberry Pi. All of the Raspberry Pi GPIO pins except GPIO 24, ...

Features 1-Wire® to I2C host interface with ESD protection diode. Stackable with other Raspberry Pi accessory boards. Buffered 5V I2C port. Extern...

Features: 16 channel digital input / outputs 8 channel 12 bit resolution analogue input (ADC) 2 channel 12 bit resolution digital to analogue outp...

Features 8 x 18-bit differential inputs Control via the Raspberry Pi I2C port Stack up to 4 ADC Differential Pi boards on a single Raspberry Pi...

Features 1-Wire® to I2C host interface with ESD protection diode. Stackable with other Raspberry Pi accessory boards. Buffered 5V I2C port. Extern...

Features RS-485 Half Duplex Port. Up to 250 kbps transfer rate. Use the Raspberry Pi to control external RS-485 devices. Stackable with other Rasp...

This adapter board allows you to use our range of Raspberry Pi boards with the Arduino Uno, Genuino UNO and other Arduino boards which use the same...

This is a 3 pin screw terminal with 5mm pitch pins. Specifications Rated up to 300V at 16 A per connector. Contact Resistance: 20 Milliohms Max Th...

This breakout board is a dual sided PCB with an SOIC 8 package on one side and a SOT23-6 package on the other. The SOIC and SOT23-6 pins are broke...

This is a 8 pin screw terminal with 2.54mm (0.1 inch) pitch pins. The 2.54mm pitch will fit our Raspberry Pi expansion boards to connect external p...

This is a 2 pin screw terminal with 2.54mm (0.1 inch) pitch pins. The 2.54mm pitch will fit our Raspberry Pi expansion boards to connect external p...

Features 16 Digital Inputs/Outputs Control via the Raspberry Pi I2C port Stack up to 8 IO Pi boards on a single Raspberry Pi Solder pad selectable...

This is a 2 pin screw terminal with 5mm pitch pins. Specifications Rated up to 300V at 16 A per connector. Contact Resistance: 20 Milliohms Max Th...

This TSSOP / SSOP breakout board is a PCB which will interface an TSSOP / SSOP package to 0.1" (2.54mm) headers which can be used on breadboards fo...

This SOIC breakout board is a PCB which will interface an SOIC package to 0.1" (2.54mm) headers which can be used on breadboards for prototyping yo...

The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry Pi, suitable for driving LEDs and radio control servos. The board is...

This is a 2 pin screw terminal with 5mm pitch pins. Rated up to 250V at 15 A per connector. Contact Resistance: 20 Milliohms Max The terminals can ...

Features 32 Digital Inputs/Outputs Control via the Raspberry Pi I2C port Stack up to 4 IO Pi boards on a single Raspberry Pi Solder jumper selectab...