Prototyping & Components

The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add-on board for the Raspberry Pi Model B+ (will not work with Model A/B as t...

These 40-pin 2x20 male headers are perfect for use with your Pi Zero and add ons to break out the pins. Add one to the Pi Zero for a nice slim prof...

The CamJam EduKit 2 is the latest edition to the EduKit family! The kit is accompanied by a set of (currently 6) downloadable worksheets (or lesso...

This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or ...

Want to start prototyping with your Raspberry Pi? You'll need this pack of 65 flexible stranded core wires with stiff ends (molded on in red, orang...

Please note: This header isn't quite tall enough for stacking Raspberry Pi HATs. RoHS Compliant -Through Board Dual Row PCB Mount Sizes - 20 pins ...

Pi Crust is a breakout board for the Raspberry Pi, making it easy to connect electronics. Compact. Really compact. I add less than 2mm to the heig...

RF Coax N-Type Male to N-Type Female surge protector for antennas.

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like...

This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two...

A button is a button, and an LED is a LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enoug...

"These go to eleven." 11 millimeters that is! These Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your ...

Slim clicky momentary switches are standard input "buttons" on electronic projects. These are half the width of classic 6mm tactile switches so the...

Slim clicky momentary switches are standard input "buttons" on electronic projects. These Adafruit Tactile switch buttons are half the width of cla...

Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz elec...

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adju...

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. Y...

The PiCoolFan is an Advanced Cooling Fan System for the Raspberry Pi, that offers total temperature control and includes a Real Time Clock! The PiC...

You can use a Rotary Encoder to control the volume of the JustBoom HATs and pHATs. This guide will show you how to install a rotary encoder on a Ju...

Don't let the tiny size fool you because this is a fully featured mixed signal test & measurement system. It's a lot more than just another lit...

The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Compared to low cost CdS cel...

RoHS Compliant -Through Board Dual Row PCB Mount Size - 2 x 20 pin (40 pin header) 6mm Contact Pin - 3mm Solder Tail RoHS Compliant Gold Flash Pla...