Skip to content
Become a Distributor Become an Affiliate Education Careers My Account

Mounting Solutions

If you're looking for ways to mount your Raspberry Pi or any other embedded project, then look no further! We have a number of ways you can mount your cases and cameras in whichever way suits your project.

Filters

£
£
  • Raspberry Pi Camera Mount 2
    Raspberry Pi Camera Mount 1
    Sold out
    £2.92 - £2.92
    (ex:Vat)
    £2.92
    £2.92 - £2.92
    £2.92

    Pimoroni Raspberry Pi Camera Mount

    Pimoroni
    Out of stock

    A stylish, small, and adjustable mount for your Raspberry Pi Camera. Allows four different angles of repose. Four Screws to secure your camera ...

    View full details
    £2.92 - £2.92
    (ex:Vat)
    £2.92
    £2.92 - £2.92
    £2.92
    Sold out
  • ScorPi Camera Board Mounting Cable
    ScorPi Cable Mounting Camera Board
    Sold out
    £7.50 (ex:Vat)
    £7.50 - £7.50
    £7.50 (ex:Vat)
    £4.42
    £4.42 - £4.42
    £4.42

    ScorPi for Raspberry Pi Camera Board

    ScorPi
    Out of stock

    The ScorPi allows you to fix the Raspberry Pi Camera Board above (or under) the Raspberry Pi in any position you want, it plugs tightly into the RC...

    View full details
    £7.50 (ex:Vat)
    £7.50 - £7.50
    £7.50 (ex:Vat)
    £4.42
    £4.42 - £4.42
    £4.42
    Sold out
  • Pibow mounted (RasPi and Case not included)
    OmniVESA in situ
    Sold out
    £3.33 - £3.33
    (ex:Vat)
    £3.33
    £3.33 - £3.33
    £3.33

    OmniVESA

    Pimoroni
    Out of stock

    The perfect mounting solution for your Raspberry Pi! Simply remove the protective backing from the OmniVESA and follow the instructions below to m...

    View full details
    £3.33 - £3.33
    (ex:Vat)
    £3.33
    £3.33 - £3.33
    £3.33
    Sold out
  • Brass M2.5 Standoffs for Pi HATs - Black Plated - In Situ Stacked
    Brass M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2
    Sold out
    £1.67 - £1.67
    (ex:Vat)
    £1.67
    £1.67 - £1.67
    £1.67

    Brass M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2

    Adafruit
    Out of stock

    "These go to eleven." 11 millimeters that is! These Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your ...

    View full details
    £1.67 - £1.67
    (ex:Vat)
    £1.67
    £1.67 - £1.67
    £1.67
    Sold out
  • Adjustable Bent Wire Stand Holding Tablet (not included)
    Adjustable Bent Wire Stand
    Sold out
    £3.75 - £3.75
    (ex:Vat)
    £3.75
    £3.75 - £3.75
    £3.75

    Adjustable Bent-Wire Stand - up to 7" Tablets and Small Screens

    Adafruit
    Out of stock

    This handy bent-wire stand was originally designed to hold up 7" tablets but the rubberized design is great for general purpose electronics & T...

    View full details
    £3.75 - £3.75
    (ex:Vat)
    £3.75
    £3.75 - £3.75
    £3.75
    Sold out
  • Rubber Feet for Raspberry Pi
    £1.67 - £1.67
    (ex:Vat)
    £1.67
    £1.67 - £1.67
    £1.67

    Rubber Feet (4 Pack)

    Adafruit
    Low stock

    Anti-Slip Rubber Feet Pads (4-Pack).

    £1.67 - £1.67
    (ex:Vat)
    £1.67
    £1.67 - £1.67
    £1.67
  • Adafruit VESA Mount
    Adafruit VESA Mount Installed
    Sold out
    £6.63 (ex:Vat)
    £6.63 - £6.63
    £6.63 (ex:Vat)
    £5.33
    £5.33 - £5.33
    £5.33

    Adafruit VESA Mount for Raspberry Pi

    Adafruit
    Out of stock

    This basic VESA mount allows you to attach a Raspberry Pi computer to the back of most HDMI monitors. It is cut out of clear 3mm acrylic so you can...

    View full details
    £6.63 (ex:Vat)
    £6.63 - £6.63
    £6.63 (ex:Vat)
    £5.33
    £5.33 - £5.33
    £5.33
    Sold out
  • Mounting Plate with Arduino and Breadboard
    Adafruit Arduino Plastic Mounting Plate
    Sold out
    £5.00 (ex:Vat)
    £5.00 - £5.00
    £5.00 (ex:Vat)
    £3.67
    £3.67 - £3.67
    £3.67

    Adafruit Plastic Mounting Plate for Breadboard and Arduino

    Adafruit
    Out of stock

    By popular demand! We now have the plates from the ARDX available separately. The acrylic plate is engraved and cut at the Adafruit factory. There ...

    View full details
    £5.00 (ex:Vat)
    £5.00 - £5.00
    £5.00 (ex:Vat)
    £3.67
    £3.67 - £3.67
    £3.67
    Sold out
  • Adjustable 8-10" Wire Stand w/Tablet Profile (not included)
    Adjustable 8-10" Wire Stand
    Sold out
    £4.17 - £4.17
    (ex:Vat)
    £4.17
    £4.17 - £4.17
    £4.17

    Adjustable Bent-Wire Stand for 8-10" Tablets and Displays

    Adafruit
    Out of stock

    This handy bent-wire stand was originally designed to hold tablets from 8-10 inches but the rubberized design is great for general purpose electron...

    View full details
    £4.17 - £4.17
    (ex:Vat)
    £4.17
    £4.17 - £4.17
    £4.17
    Sold out
  • Velcro Case Feet for the Raspberry Pi
    £1.67 - £1.67
    (ex:Vat)
    £1.67
    £1.67 - £1.67
    £1.67

    Velcro Feet (4 Pack)

    Adafruit
    In stock

    Want to stick your electronics project anywhere? You need these Velcro Feet! With Velcro Case Feet, you can stick your Raspberry Pi/BeagleBone/Ardu...

    View full details
    £1.67 - £1.67
    (ex:Vat)
    £1.67
    £1.67 - £1.67
    £1.67