ScorPi for Raspberry Pi Camera Board

The ScorPi allows you to fix the Raspberry Pi Camera Board above (or under) the Raspberry Pi in any position you want, it plugs tightly into the RCA port of your Raspberry Pi and works with or without casing. The tube is flexible but stays fixed in the position it's bent into for precise adjustments. You can easily replace any bolt or washer in the local hardware store. The ScorPi comes pre-assembled with a right-angle RCA brass plug on one end, and a 2mm bolt fixing on the other. Simply slide the 2mm bolt fixing through the mounting hole of the camera and bolt using the included stainless steel nut and a nylon washer from each side.

• High-end Raspberry Pi accessory
• 100% Dismountable
• 360 Degrees precise positioning
• Plugs directly into the Raspberry Pi via RCA port
• Designed and mounted by Graspinghand
• 195mm x 22mm x 9mm / 4.0mm diameter gooseneck tubing
• Weight - 27 g

Material: Solid brass connectors / Stainless steel RCA pin / Gooseneck tubing with PVC sleeving / Stainless steel bolts & nuts / Nylon washers Design: Each connecting part is designed & assembled by Graspinghand / CNC machined especially for this product. This is a high-end Raspberry Pi accessory, build to work well and last long Tools Needed: In order to unmount the ScorPi you will need...

• Long-nosed pliers
• Narrow flat screwdriver
• 1.5mm Allen key

Raspberry Pi Camera Module not included NB: This product is only compatible with the Model B!