HiFiBerry Digi - Standard Version

The HiFiBerry Digi is a high-quality S/PDIF output board for the Raspberry Pi model A/B. It is designed as an add-on board that connects to the main GPIO and P5 headers of the Raspberry Pi. It provides a bit-perfect output meaning that the audio data stream will not be modified in any way. This is the standard version which does not have and output transformer to provide full galvanic isolation between the Raspberry Pi and your DAC on the electrical output. The standard version is usually the best one for most purposes, however there is a transformer version available as well.

• Dedicated S/PDIF interface chip supports up to 192kHz/24bit resolution.
• Optical (Toslink) and electrical outputs.
• Bit-perfect output, audio data stream will not be modified in any way.
• Connects directly to the Raspberry Pi, no additional cables needed.
• Directly powered from the Raspberry Pi, no additional power supply required.
• Optional: high-bandwidth output transformer provides full galvanic isolation of the electrical output (not in the standard version).
• Nlyon spacer included to fix the board onto the Raspberry Pi.
• This HiFiBerry board does not need any soldering. However, you have to solder a small 2 x 4 pin male header onto the Raspberry Pi. Make sure, that you have a Raspberry with the P5 header!

Note about the compatibility with Raspberry Pi Model A+/B+ and 2B: This board is only compatible with the Raspberry Pi model A and B providing they have a P5 header (earlier versions do not). If you own a newer Raspberry Pi model A+/B+ or 2B, please use the HiFiBerry Digi+. The sound quality of both boards is identical. Important note: While the hardware is able to output DTS/Dolby Digital, the software has to be adapted to support this. We will support the developers to implement this. Unfortunately we can?t guarantee that this feature will work with a specific software. Please ask the developers of the software if this is supported.