JustBoom Blog

Pi Supply JustBoom Blog

JustBoom

RSS
  • Add A Potentiometer to Your JustBoom Standalone Amp

    This guide will show you how to install a potentiometer to your JustBoom Standalone Amp. When on its own the Standalone Amp can accept an external input via its line-in connector. Despite we only show a 10KΩ Log potentiometer several...

    Mon, Jan 09, 2023 Chris Rush
    Read now
  • Add A Rotary Encoder to Your JustBoom Boards

    This guide will show you how to install a Rotary Encoder on your JustBoom. You can use a Rotary Encoder to control the volume of the JustBoom HATs and pHATs. This guide shows you a specific type of rotary encoder...

    Mon, Jan 09, 2023 Chris Rush
    Read now
  • Add An IR Receiver to Your JustBoom Boards

    This guide will show you how to install an IR (Infrared Receiver) on your JustBoom. All the JustBoom HATs and pHATs can be controlled with a remote. To enable this feature you need to install the Infrared Receiver that comes...

    Fri, Jan 06, 2023 Chris Rush
    Read now
  • Set Up Your JustBoom DAC And Case

    This guide will show you how to set up the JustBoom DAC. This guide has been updated in May 2017. If you bought a case before then you might want to follow the previous guide. You can tell them a...

    Tue, Jan 03, 2023 Chris Rush
    Read now
  • Set Up Your JustBoom Amp And Case

    This guide will show you how to install the JustBoom Amp  This guide has been updated in May 2017. If you bought a case before then you might want to follow the previous guide. You can tell them a part...

    Tue, Jan 03, 2023 Chris Rush
    Read now
  • Set Up Your JustBoom Digi Zero pHAT And Case

    This guide will show you how to install the JustBoom Digi Zero pHAT onto the Raspberry Pi. Remember this pHAT is compatible with all Raspberry Pis but has been specifically designed for Raspberry Pi Zero v1.2, v1.3 and W.  ...

    Tue, Jan 03, 2023 Chris Rush
    Read now
  • Set Up Your JustBoom DAC Zero pHAT And Case

    This guide will show you how to install the JustBoom DAC Zero pHAT onto the Raspberry Pi Zero. Remember this pHAT is compatible with all Raspberry Pis but has been specifically designed for Raspberry Pi Zero v1.2, v1.3 and W. Unpack...

    Thu, Dec 22, 2022 Chris Rush
    Read now