This guide will show you how to install a potentiometer to your JustBoom Standalone Amp. When on its own the Standalone Amp can accept an external input via its line-in connector. Despite we only show a 10KΩ Log potentiometer several...
This guide will show you how to install a Rotary Encoder on your JustBoom. You can use a Rotary Encoder to control the volume of the JustBoom HATs and pHATs. This guide shows you a specific type of rotary encoder...
This guide will show you how to install the two RCA connectors on your JustBoom DAC Zero pHAT. If you are interfacing with a professional system or a home Hi-Fi chances are that you will need to use RCA leads....
This guide will show you how to install an LED on your JustBoom DAC Zero or Digi Zero. Adding a playback LED adds a nice visible feature for you to know when the music is playing and when it is...
This guide will show you how to install an IR (Infrared Receiver) on your JustBoom. All the JustBoom HATs and pHATs can be controlled with a remote. To enable this feature you need to install the Infrared Receiver that comes...
This guide will show you how to set up the JustBoom DAC. This guide has been updated in May 2017. If you bought a case before then you might want to follow the previous guide. You can tell them a...
This guide will show you how to install the JustBoom Amp This guide has been updated in May 2017. If you bought a case before then you might want to follow the previous guide. You can tell them a part...
This guide will show you how to install the JustBoom Digi Zero pHAT onto the Raspberry Pi. Remember this pHAT is compatible with all Raspberry Pis but has been specifically designed for Raspberry Pi Zero v1.2, v1.3 and W. ...
This guide will show you how to install the JustBoom DAC Zero pHAT onto the Raspberry Pi Zero. Remember this pHAT is compatible with all Raspberry Pis but has been specifically designed for Raspberry Pi Zero v1.2, v1.3 and W. Unpack...
